Here is the instructions on generate BWM FSC code with FSC Code Generator software program, easy 3 steps.

Equipments needed:

FSC Code Generator software

ENET (Ethernet to OBD)) cable

EDIABAS Tool32 software

FSC CODE Calculator Software for BMW Navigation can be free downloaded from search engines:

Password: “Eintracht_Frankfurt”

Or you can get from other search engines

In addition, you’ll need an ENET cable and a working EDIABAS installation on Win XP 32-bit. 64-bit will properly not work.

Disclaimer: You are on your own risk. It will generate the codes for BMW North America Premium 2014.

This was tested on a 2012 F30 with CIC.

It generates the FSC in three steps. But you have to change the “year-parameter” in the batch-file to a later map (e.g. 2016 – or even later – instead of 2014), then it works perfectly.

The Default 0x06 for 2014 does not work, but 0x09 does!

Main steps:


Open FSC Generator software on desktop

Click “Read FSC


Select BMW chassis, e.g E-series

Click Connect

Click Read VIN

The software will display vehicle information


Click Read FSC (1B)


Click Save to File



Back to FSC MAP menu

Select DECODE FSC button

Click Load file and load dump bin file


Click “Search” and browse to C:/EC:APPS/a hex

Click Decode button


Finish decoding


Back to FSC MAP menu

Select “GENERATE” button

Code has been generated

Open C:﹨EC:APPS﹨code.txt to check the FSC code

PS: If you fail o generate for NBT, try do following settings:

You can actually grab the 1B or DE file from E-sys by doing the following:

FSC Extended

Base variant 0x63 (For HU_CIC or HU_NBT)

Click Identify

Application ID 0x1B for (App ID 27 for CIC) 0xDE (App ID222 for NBT) <— This is the App for your Nav enabler

Upgrade Index 0x1

Move Store FSC from the left to the right

Click Read

Click Save and name the file FXXXXXX_0001B001.fsc for CIC or FXXXXXX_000DE001.fsc for NBT where FXXXXXX is your VIN.

Both CIC and NBT work.

And if you use NBT&CIC Navigation Map Update Calculator for BMW, it could be easier.

Move your blog to Nouw - now you can import your old blog - click here!



Here comes a fresh update for Xhorse VVDI 2 Commander Key Programmer. Now the newest software version is V1.2.2. This blog will offer you free download link and update information.


VVDI 2 Key Programmer V1.2.2 Installer Free Download Link:!7sAC1BKQ!wbye-88VPEU6oRPmaws6O4MPGrzeCyO7Oy31uYo1vSU

VVDI 2 Commander V1.2.2 Update Information (2016-10-27):

Require firmware V2.2.2
VAG V1.2.2

  1. Bugfix
    BMW V1.2.2
  2. Bugfix
    Porsche V1.2.2
  3. Bugfix
    PSA V2.0.4
  4. BugfixTransponder Programmer V1.2.2
  5. Support copy transponder: HITAG2 (46), 11, 12, 13, 7935(ID42)
    2. Immobilizer data tool: bugfix BMW motorcycles
    3. BugfixJ2534 V1.2.2
  6. Bugfix
    Online Upate Tool V1.2.2
  7. Bugfix
    Quick Start V1.2.2
  8. Bugfix



This blog collects some errors of NCSExpert and what they mean and how to fix it. Hope to help customers.

Notice: These solutions are collected from user members, you should try these solutions at your own risk!


COAPI-1020: cannot read file C:\NCSEXPERT\WORK\FSW_PSW.MAN


Rename your modified FSW_PSW.TRC to FSW_PSW.MAN. Refer to the DIY guide and make sure you follow the steps.


Trying to code Mini R56, When select R56 and then press F6 to go back, get the following error:

COAPI-1142: PSW faulty 25_s


When you are working on different model cars, be sure to clear out the content in the file. Do not delete it (the file), just save it as a blank document. This is actually a good thing (recommended) to do after coding a car.

The error popped up because of different values between the 328 and the Mini.

Once you have a blank file, you will not have that error.


COAPI-1141: FSW faulty c:\FSW_PSW.TRC – erase contents of your .man file



Confirm the 2 files C:\NCSEXPER\WORK\FSW_PSW.MAN and C:\NCSEXPER\WORK\FSW_PSW.TRC are empty and there both 0KB.


when trying to code X5 2011.

Got this: FA: # -kle1


Update your NCS with ista/p v41. Need the v41 daten in order to do anything with the car. Usually when you get those errors, it’s because the vehicle has an option code (or build criterion code) in the FA that the loaded daten doesn’t understand/recognize and you need to grab the latest daten so NCS Expert knows how to handle the options.





1) You might have a bad daten file. In order to determine whether you do or you don’t….download the TRC file. Rename it to MAN without altering anything in it. Then attempt to code with that UNCHANGED man file. If you still receive the COAPI-1043 error then it’s a bad daten file. Find an older or newer CAS2.C05 and replace the CAS2.05 file in your current daten folder.

2) If it’s not a bad daten (i.e. it didnt get kicked back) then it is bad coding. Whatever changes you are trying to make in you MAN file prior to upload are not understood by the car. The code is nonexistent and better research needs to be done in order to code the right module. All cars are not created equal so make sure you understand where you got the code from and who had success using it.

From, post



This blog will teach you how to read pin code for Peugeot 206 via OBDSTAR X300 Pro3 Key master, hope it helps someone.

Tool needed: X300 Pro3 Key master with EEPROM/PIC adapter

Vehicle: Peugeot 206







Select EEPROM and press ENT to continue


Select Read pin code


Then choose vehicle model Peugeot 206 and press ENT

obdstar-x300-pro3-key-master-5 obdstar-x300-pro3-key-master-6

BSI 95160-> V2, wait for a while

obdstar-x300-pro3-key-master-7 obdstar-x300-pro3-key-master-8

Enter a filename to save

obdstar-x300-pro3-key-master-9 obdstar-x300-pro3-key-master-10

Done! The password is 3FFF


X300 PRO3 key master by OBDSTAR Company features with the immobilizer key programming function of SKP900, as well as new function e.g. Odometer adjustment, EEPROM/PIC and OBDII. If you want more details, please visit:



Pay attention mates! MPPS V18 now is available to get! With latest software V18.12.3.8 only $99.99 free shipping! Here is all information you need, include MPPS V18 supported car list and some user feedbacks for you reference.

Part1. MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable Basic Information All Here:

mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable-1Cover mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable-2Cover mpps-v18-main-tricore-multiboot-with-breakout-tricore-cable-3Cover

MPPS V18 supported car list:!E1R3gbSL!SUCKeib1fhhuJOxrdQtWBU7H8FX7M4O3XXR4fJQUVpM

Part2. What’s NEW about MPPS V18 ECU Chip Tuning?

  1. Add support for advanced functions on Magneti Marelli ECU. Cover a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens (VAG Simos PCR/ Simos 8 unlocking), Bosch (up to TP12, MEDC17 Checksum Correction), Marelli, Delco, Sagem, Trionic…
  2. Read / Write of Micro, Flash and EEPROM without using a BDM programmer:

Full Read / Write Micro, Flash and EEPROM over K-line and CAN:

Opel 6O2, Opel 6O3, Fiat 6F3

Full Read / Write Micro and EEPROM over K-line:

Fiat 6JF, Fiat 8DF, Opel 6JO

Full Read / Write Micro and EEPROM over K-line and CAN:

Fiat 8F2, Fiat 8F3

Full Read / Write Micro and EEPROM over CAN:

Fiat 8GM, Fiat 8GS

Full Read / Write Flash and EEPROM over CAN:

Fiat 5SF3, Fiat 5SF9

Full Read / Write EEPROM over K-Line:

Fiat 5SF3

Full Read / Write Flash and EEPROM over K-line and CAN:

Fiat 5SF8

Full Read / Write Micro over CAN:

Fiat ME7.9.10, Fiat ME7.6.3

  1. Add boot mode support for controllers with the Tricore processor.
  2. Auto detects ECU and processor type. No need to select from list.
  3. Patch function for OBD Flashing of TPROT ECU’s (supports only VAG)
  4. Read/Write of all memories EEPROM, IROM, XROM (where possible)

Part3. Users Feedbacks on MPPS V18 chip tuning interface

I bought this tool MPPS V18 recently. I have tested on 6F3. Read/Write all Micro, flash and EEPROM via OBD. Very fast and stable too!

I just got my MPPS V18 interface, it works perfect. I have just managed to read via OBD with multiboot function a Bosch ME7.9.10 from Fiat Punto T-JET 1.4 turbo. For me this tool is the only one that can read from OBD this ECU!

Trying to read the ECU EDC17C46 in my 2011 VW Scirocco with MPPS V18 using the Tricore cable. Open the ECU and use resistors to read in Tricore Boot Mode. Finally success!



OBDSAR F109 (SUZUKI Key Programmer) is appropriated for calculating 20-4 digit PinCode,programming Auto Keys and Correcting Mileage of a part of SUZUKI vehicles.It’s easy to take away,and it’s appearance is designed elaborately.The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming. Upgrade via TF card at any time.

OBDSTAR SUZUKI PinCode Calculator F109 with Immobiliser and Odometer Function
SUZUKI PinCode Calculator F109  Features:
1. Support to calculate 20-4 digit PinCode cars.
2. Support to read 20-8 digit PinCode automatically.
3. Program Keys for most of SUZUKI.
4. Correct odometer for SUZUKI cars(not all).
5. No need to connect with computer, plug and play, automatic transfer.
6. No need to buy tokens.
7. One Key Upgrade
8. Have good man-machine interaction.
SUZUKI PinCode Calculator F109 Models Included
Odometer AdjustmentSmart key systemImmobiliser
        Grand Vitara
                Type 1 D70F3421
                Type 2 D70F3422
        Kizashi D70F3422
Select from vehicle
                       Type 1
                       Type 2
                   Type 1
                   Type 2
                   Type 3
                   Type 4
             Baleno 96-01
             Grand Vitara
             Wagon R
            RIZT 07-15
Select from type
          Type 1
          Type 2
          Type 3
          Type 4
          Type 5
          Type 6
          Type 7
          Type 8
          Type 9
          Type 10
          Type 11
          Type 12
Article from OBD2 Blog Site:



​Here are two useful reviews on xhorse vvdi mb w204 w207 all key lost. Go on reading and get tips yourself.

vvdi mb bga tool and Mercedes w204 all key lost:
Bought one MB BGA tool software 2.0.8 from this site ( to make key on w204 with all key lost but failed, other models are working fine,
I made a refund request on them, and the saler told me to wait for the new update ,
because 2.1.0 version is able to read W204 ESL correctly……while after two weeks
later they sent me the 2.1.0 software link ,then I orderd 2 tokens(W204 need to
 buy 2 tokens to read the ESL information), I updated my machine and tested it
working fine as advertised. Very happy with this machine
Tip: W204 all key lost can only be done via vvdi mb software v2.1.0 or higher versions.

vvdi mb tool and Mercedes w207 all key lost:
i have this tool with Condor xc mini master 1 free token on the machine – 0 paid for tokens. i have w207 with lost keys and
 when quering password it says i have to buy token; that is, actually i need 2 tokens for all lost keys. then i talked about this issue to xhorse shop. they confirmed this but it’s good that i can get 1 token a day for free, cause i have a condor key cutting machine.
Tip: vvdi mb all key lost needs 2 tokens (condor users can be get 1 free token every day.)

Tech support from  Xhorse VVDI



JLR SDD2 supports Land Rover and Jaguar Scan tool Diagnostics, Vehicle Reprogramming, immo key programming and Smart key system.



The newest software JLR SDD2 V147 Free download:

Notice: It’s Free but Time-Limited


Running system: Windows XP (SP2 or later), Win 7, Win 8 and Win 10


JLR SDD2 for All Landrover and Jaguar Features:

  1. Self-service equipment development
  2. Upgrade Free online
  3. Unlimited upgrades, always keep the latest software, and software of dealer shop in sync
  4. Provide free jaguar and land rover JLR SDD registration code
  5. Free Support:

(1) Reprogramming for all jaguar vehicles

(2) Reprogramming for all landrover vehicles

(3) No password for all jaguar key and smart key

(4) No password for all landrover key and smart key

(5) JLR SDD Register Code is free for you


JLR SDD 2 Functions:

  1. JLR Approved device
  2. Replacement for JLR SDD2
  3. Most cost effective Jaguar pass-thru VCI device
  4. Covers CAN, ISO9141, SCP Vehicle Networks
  5. 12ft USB Cable as standard included
  6. Best Suited for Legacy, Current and Future Vehicles
  7. Easy to update for J2534 new functionality updates


JLR SDD2 is a good replacement of JLR Mangoose SDD2 cable with excellent performance in diagnosis, reprogramming for JLR models and key programming without pin code,



​Fresh update for you! SuperOBD SKP-900 Key Programmer V4.4 has been released at yesterday. Here will offer you free download link and detailed update information. Enjoy mates!
SKP900 Key Programmer V4.4 Free Download Link:

SKP-900 Auto Key Programmer V4.4 Update Information:
1、HYUDNAI Elantra Key Program 2008-
2、HYUDNAI Elantra Key Program 2012
4、HYUDNAI I30 Key Program
5、HYUDNAI IX35 Key Program
6、HYUDNAI IX35(F/L) Key Program
7、HYUDNAI IX35(F/L) Smart Key Program
8、HYUDNAI New IX35 Key Program
9、HYUDNAI Verna Key Program
10、HYUDNAI Verna Smart Key Program
12、HYUDNAI Elantra(MDC) Key Program
13、HYUDNAI Elantra(MDC) Smart Key Program
14、HYUDNAI H1 Key Program 2011-
15、HYUDNAI SANTAFE(F/L) Key Program 2009-
16、HYUDNAI SANTAFE(Gasoline)Key Program 2006-
17、HYUDNAI Veracruz(EN)Key Program 2006-
18、HYUDNAI Coupe Key Program 2012-
19、HYUDNAI Coupe Key Program 2009-
20、HYUDNAI Rohens(BH)Key Program 2012-
21、HYUDNAI Rohens(BH)Key Program 2009-
22、KIA Forte Key Program 2009-2013
23、KIA SPORTAGE Key Program 2008-2013
24、KIA SPORTAGE R Smart Key 2011
25、KIA K5 Key Program 2011-2013
26、KIA K5 Smart Key Program 2011-2013
27、KIA K5 Key Program 2014-
28、KIA K5(HEV) Key Program 2013-
29、KIA K5(HEV) Smart Key Program -2013
30、KIA Cadenza(VG)Key Program 2012-
31、KIA Cadenza (VG F/L) Key Program 2013-
32、KIA Opirus Key Program 2007-
33、KIA SORENTO Key Program 2013
34、KIA SORENTO Key Program 2009-
35、KIA SORENTO(Gasoline) Key Program 2007-2008

For SK-P900 newest update notice, please keep following this official blog!

Article from:



​It’s a full BMW INPA software for F and E series models. Wish this helps.
Free download
BMW Standard Tools and INPA 5.0.6!atxDATqT!r6SO9Wu75GuDJmpbTTO48Q (unknown security)
INPA 5.0.2 software (tested without issues, safe to use)

BMW Standard Tools 2.12 – Install First

  • Includes (EDIABAS v.7.30, Tool32 v.4.03, INPA v.5.06, WinKFP v.5.31 & NCS Expert v.4.01).
INPA_Fxx_v.2 – Install Second
  • Copy INPA_Fxx_v.2 folder to C:\EC-Apps\INPA_Fxx_v.2 and EDIABAS to C:\EDIABAS overriding existing EDIABAS Folder.
  • Run INPALOAD.exe from INPA_Fxx_v.2 BIN folder (C:\EC-Apps\INPA_Fxx_v.2\BIN\INPALOAD.exe).
  • Note: For Exx connection, you will need to change EDIABAS.ini file to “INTERFACE = STD:OBD” and edit OBD.ini Com Port settings accordingly to match you PC’s Com Port settings.

Note: software from customer share at TRY ON YOUR OWN RISK!

How to setup BMW Standard Tools on Windows 7 32bit
How to install INPA NCS-Expert WinKFP on Windows 10 64bit

Article from: