Car key programmer

Here is the instruction on programming remote key for GM Chevrolet New Prisma by using OBDSTAR X300 Pro3 Key Master auto key programmer.


In Brazil, there’s a Chevrolet model called the Prisma locally produced by General Motors in Gravatai.t’s basically the low-cost version of the Sonic, but it’s actually cool in its own way and, more importantly, it’s been updated for the 2015 model year and now it comes with lots of goodies for a tiny dribble of money.


Instruction:

Connect X300 Pro3 with vehicle via OBD socket

Select vehicle Brand:GM

Select Immo/Remote

Select Immo/Remote

Select Chevrolet

Select Chevrolet

Select Cruze (there is no Prisma option under OBDSTAR Key Master Chevrolet list, select Cruze)

Select Cruze

Select Without Smart

Select Without Smart

Select All keys lost

Select All keys lost

Enter security code and confirm

enter-security-code

Switch ignition off for 5 sec, and then switch ignition on

Configuring the system, wait for about 10-minutes
Switch ignition off , remove the key

Open and close the driver door, confirm all electrical closed
Turn on the ignition switch.


Whether to program next key?
Switch ignition off , remove the key

Insert a new key, switch ignition on

insert-a-new-key

Switch ignition off , remove the key

Open and close the driver door, confirm all electrical closed
Turn on the ignition switch


Whether to program next key?

Switch ignition off , remove the key

Open and close the driver door, confirm all electrical closed

Configuring the system, wait for about 45 sec

Turn on the ignition switch

Switch ignition off

Turn on the ignition switch
Program Complete

program-complete

Start car with new programmed key
It is working.

https://eobd21.wordpress.com/2016/11/25/program-key-on-gm-new-prisma-by-obdstar-key-master/

Blog using your mobile phone - One of the best blogging apps on the market - click here!

Likes

Comments

Car key programmer

Here is the step-by-step instruction on programming key for OPEL Insignia when all keys have lost by using OBDSTAR X300 Pro3 Key Master key programmer.


Note: Pin code is required during key programming procedure.


Procedure:

Connect X300 Pro3 with vehicle via OBD and power it on
Select vehicle make: Opel

select-opel

opel-software

Select Immobilizer

Select Immobilizer

Select from vehicle

Select from vehicle

Select vehicle model: Insignia

Select vehicle model: Insignia

OBDSTAR Key Master has some other Opel models listed:

Aglla 00-08
Astra 95-04
Astra H
Calibra 95-98
Combo 98-
Corsa 95-06
Insignia
Meriva 02-
Movano 98-01
Omega
Sintra 97-98

and more…

Select with or without smart key, here we choose Without Smart

choose Without Smart

Select All key lost

Select All key lost

Enter security code and confirm

Enter security code and confirm

Switch ignition off for 5 sec, and then switch ignition on

Configuring the system, please wait for about 10 mins..

Switch ignition off, remove the key

Open and close the driver door, confirm all electrical are closed
Whether to program next key
Switch ignition off, remove the key

Insert a new key, switch ignition on

Insert a new key

Switch ignition off, remove the key
Open and close the driver door, confirm all electrical are closed

Turn on the ignition switch


Whether to program next key?
Switch ignition off, remove the key.


Configuring the system, please wait for 45 sec…
Turn on the ignition switch
Switch ignition off

Turn on the ignition switch

program-complete

Program complete.

http://www.key-programmer.org/2016/11/23/program-opel-insignia-all-keys-lost-by-obdstar-x300-pro3/

Likes

Comments

Car key programmer

OBDSTAR Technology has newly released its first tablet pad-OBDSTAR X300 DPAndroid Tablet Key Programmer. X300DP covers all functions of X100 Pro, X200 Pro, VAG-Pro and X300 Pro3 Key Master (X300 pros includes F108+, F100 etc.)

obdstar-x300-dp-key-programmer-and-scanner

X300 DP has reached a higher level in key programming and diagnosis. Inheriting from OBDSTAR professional auto programming and advanced diagnosing technology, X300 DP is characterized by covering wide range of vehicles, featuring powerful function, and providing superior quality. Meanwhile, taking advantage of Android system, X-300 DP integrates more application and service, such as Maintenance Database, remote assistant, and One Key Update etc.

obdstar-x300dp-key-master

Software Update: One key upgrade; Free update for one year

Multi-Language: English, simplified Chinese, traditional Chinese, language customization.

OBDSTAR X300 DP Functions:

Read and clear fault codes;
Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Display live data;
Component actuation;
Read keys from immobilizer memory
New ECU programming;
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader;
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
VCI diagnose
One key upgrade via wifi
Remote assistance
Built-in repair video
Report center
EEPROM chip read and immobilizer initialization;
EPB(Electric park brake);
Oil/Service reset;
Battery matching;
ABS
TPS
SRS reset
TPMS(low tire)reset
Steering angle reset
CVT learning/Value reset
EEPROM/PIC adapter
OBDII Diagnosis

Full Package configuration= Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII+ABS+ TPS+ SRS reset+ TPMS(low tire)reset+ Steering angle reset+ CVT learning/Value reset+ EPB+ Oil/service reset+ Battery matching+ Diagnosis(Japanese and Korean serials)

OBDSTAR X300 DP Standard package: Immobilizer+ odometer adjustment+ EEPROM/PIC adapter +OBDII, please choose item # SP283-B ,only cost 719USD.

obdstar-x300dp-key-master-pic

OBDSTAR X300DP Tablet Vehicle coverage:

BAIC, BENZ, BESTURN, BMW, BRILLIANE, BYD, CHANGAN, CHANGHE, CHERY, CHRYSLER(CHRYSLER/DODGE/JEEP), DFFENGSHEN, DFPV, FAW, FIAT, FORD/LINCOLN, GEELY/HUAPU/SQYL, GM(BUICK/CADILLAC/CHEVROLET/GMC/HUMMER), GREATWALL, HAFEI, HAWTAI, HIMIKO, HNMAZDA, HONDA/ACURA, HONGQI, HYUNDAI, ISUZU, JAC, JAGUAR, KIA, LANDROVER, LIEBAO, LIFAN, LUFENG, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN/INFINITI, OPEL, PEUGEOT/CITROEN, PORSCHE, PROTON, QQROS, RENAULT, ROEWE/MG, SGMW, SMART, SSANGYONG, SUBARU, SUZUKI, TJFAW, TOYOTA/LEXUS, VW/AUDI/SKODA/SEAT, YOUNGLOTUS, ZZMAZDA, ZZNISSAN, ZOTYE;

Note: There would be some difference to software in different countries. If need more specific information, please feel free to contact us or our distributors in your area.

OBDSTAR X300 DP Packing list

X300 DP tablet computer
5V DC adapter power
12V DV adapter power
Adapter
Adapter board
USB cable
OBD15P main cable
Pin adapter
HONDA-3
HYUNDAI/KIA-10
OBD II-16
KIA-20
Product Certification
User’s Manual

http://blog.obd365.com/2016/11/21/obdstar-x300-dp-tablet-key-programmer-full/

Likes

Comments

Car diagnostic tool

Here is the Porsche Cayenne BCM maintenance case. Hope it will help whose who encounter such a job.
A Porsche Cayenne arrived at my store and he said his car, the night light taillights, the right lamp did not work, to seek help and fix the malfunction.

I would like to tell you, the car all LED turn Light, are controlled by the BCM control unit, so, in this case, you must first come up with BCM check

Let us look at the shape of the car:
This is the car
This is the BCM control unit, which is also the anti-theft control unit, if you want to increase the key, you need to disassemble the BCM, read the anti-theft data: BCM appearance, it is also anti-theft control unit
This is the internal distribution of BCM: This is the BCM internal diagram
This is the solution to this problem, I have identified the various functions of the IC out:
lamp-driver-ic
After more than 10 minutes of investigation, we identified the SC33481BLPNAF chip has been damaged, which led to the right lamp does not work.

After replacing IC, the function is normal. At this step, we need to pay attention to, the chip must use the new, original, SC33481BLPNAF his appearance is QFP, in the welding process, need some skill, if the welding failure, all The efforts are futile.

2016.04V Porsche PET 7.3 Catalog Multi-Language

Likes

Comments

ECU chip tuning tool

There are many versions of Ktag programmers in the markets, some K-tag EU clones, some Ktag China clones. Here, obd365.com made comparison between these copy version ecu tuning tools: Ktag euro vs Ktag china.

EU K-TAG vs China K TAG:

EU clone is different from Chinese clone… The EU version is made on Austria with blue PCB (blue, red, purple, 3 colors of eu clone from different places)… while the Chinese version is made in the China factory with green PCB and high quality components.

Ktag eu clone programmer:

K-tag eu with blue board:

euro-ktag-clone-pcb-blue

Eu ktag clone with red board:

ktag-eu-clone-pcb-red

Ktag eu clone with purple pcb:

v7-020-ktag-eu-clone-pcb-purple-1

v7-020-ktag-eu-clone-pcb-purple-2

v7-020-ktag-eu-clone-pcb-purple-3

Note: the purple ktag is the newest eu version with firmware v7.020.

Ktag china clone ecu tuning tool:

Ktag clone with green pcb:

Ktag V6.070

se80-c-ktag-pcb-1

se80-c-ktag-pcb-2

Note: there are different chinese ktag, all with green pcb. And the pcb designed as above is the most popular one. The ktag firmware v6.070 can work with ksuite v2.13 for lots of ECU types without token limitation, including the newest BMW Gasoline F Chassis and Mercedes W222.

Ktag v6.070 car list: k-tag-ksuit-supported-list.xlsx

Ktag ktm100:

se80-d-ktag-ktm100-pcb-1

se80-d-ktag-ktm100-pcb-2

Note: this is the newest ktag firmware v7.003 with one button for token reset. And this KTM100 K-TAG is 100% J-Tag compatible.

Ktag ktm100 car list: ktm100-ktag-car-list.pdf

Ktag v6.070 vs ktag ktm100 v7.003:

ProductKtag v6.070Ktag KTM100 v7.003
Imagese80-c-ktagse80-d-ktag-ktm100
Firmware versionV6.070V7.003
Software versionKsuite V2.13KTM100 V2.13
Token chargingThrough PC programmingWith one renew button
BMW F chassis petrolNOYES
Mercedes-Benz W222NOYES
LanguageEnglish/ Italian/ German/ French/ Portuguese/ SpanishEnglish/ Italian/ Portuguese,
Protocolover 95%(BDM MOTOROLA MPC5xx)More than ktag ksuite(BDM MOTOROLA MPC5xx)

Conclusion:

The differences of Ktag clones with purple 2016, blue, red or green PCB:

The green board Ktag have been worked much more as technicians and users tested on various ECUs without issues along the way. Also, the professionals have been fitting all with much better optical connectors.

Ktag clone with green PCB wins!

http://blog.obd365.com/2016/11/16/ktag-china-clone-v6070-vs-ktag-eu-clone-v7020/

Likes

Comments

ECU chip tuning tool
Have tried to flash EDC16 with KESS V2 clone, but i can not see anymore HW and VIN from the EDC16 ECU and the car not starts! Then worked with Fgtech Galletto v54 master, all EDC 16 on BDM without any problem… (BIG thanks to maki1)

Here is what i did with the EDC16U34 from VAG ECU, using Fgtech galletto v54.

The BDM pad here
The BDM pad here
Now carefully align with the adapter springs drop and secure frame
 align with the adapter springs drop 1
 align with the adapter springs drop 2
 align with the adapter springs drop 3
Connect FgTech galletto correctly
Connect FgTech galletto correctly
Open FgTech software
Make sure you have 12v+ feeding FG Tech and the intermediate adapter
12v+ feeding FG Tech
Switch the intermediate adapter ON
Red LED will illuminate
Red LED will illuminate
Click on Select Driver-> BDM/Jtag-> Connect
select-driver
select-bdm
select-connect

connect
If everything is ok, the green bar will start loading and finally display ECU info
the green bar will start loading
display-ecu-info
When finished, turn off the switch and exit program
turn off the switch
Same procedure applies to all EDC16


In short,
we need flash the ECU with BDM if we have full flash for this ECU…
open ECU and read all with BDM…
must find full flash hw and sw version for this ECU…
when write chose flash,not not all (eeprom and MCU not need).

Note: This method applies to all Bosch EDC16 and Me9 ECUs.

Likes

Comments

ECU chip tuning tool

Successfully read VAG Passat Bosch EDC15P+ on bench by Kess v2 v4.036 Ksuie V2.60 ecu tuning kit.

kess-v2-read-passat-EDC15P+-ecu-1

Run Ksuite v2.06 software

kess-v2-read-passat-EDC15P+-ecu-2

Model:

Volkswagen Passat V with 2000 BOSCH EDC15P+ ecu

Read cable manuals:

Power supply cable

Obdii standard cable

Vag cable

kess-v2-read-passat-EDC15P+-ecu-3

kess-v2-read-passat-EDC15P+-ecu-4

kess-v2-read-passat-EDC15P+-ecu-5

kess-v2-read-passat-EDC15P+-ecu-6

kess-v2-read-passat-EDC15P+-ecu-7

Select ID to read ECU ID

Then Follow all the screen instructions in Kess:

Connect vehicle to stable battery charger to use this serial protocol

Switch on dash-board and check connection to go on

Starting communications…

kess-v2-read-passat-EDC15P+-ecu-8

Switch off dash-board to continue

Connect vehicle to stable battery charger

Switch on dash-board and check connection to go on

Identifying ECU…

kess-v2-read-passat-EDC15P+-ecu-9

Save ecu data

Switch off dash-board to continue

Select READING to read ecu data

Follow all the screen instructions to continue

kess-v2-read-passat-EDC15P+-ecu-10

kess-v2-read-passat-EDC15P+-ecu-11

Save ecu data

Kess v2 reading ecu completed

kess-v2-read-passat-EDC15P+-ecu-12

Done!

http://blog.obd365.com/2016/11/13/kess-v2-read-vag-bosch-edc15p-ecu/

Likes

Comments

Car diagnostic tool

Here is an interesting topic “Nissan Consult 3 plus and J2534 tools”. Enjoy.

The topic is started with a question and answer.

Question:

Any one know if Bosch proflasher j2534 can be used as a VI with Consult III+

I try changing diagnostic file to use with passthru but so far no good.

Answer:
Yes, it can be used but limited. Takes a little more than just changing the diagnostictool.ini also have to mod registry. I’m sure some shark on here looking for money will do it for you. I will tell you the best thing. When you hit select vi/mi….. Do not ever hit connect! Just highlight the USB with serial 1234567 and then select cancel. Then you should see interface connected on home screen. Also need to make sure when you mod the diagtool ini you use the correct name of your interface. has to match exact name in registry.

For example, my Cardaq-m can be recognized by the Consult 3+ v34.11. I edited the diagnostictools.ini located here

C:\CONSULT-III_plus\System\Application\ApplicationData\CommonSetting\DiagnosticTool.ini

and changed the vi_device_name like so

[device]
vi_device_name=CarDAQ-M

I also went into the regedit (registry Editor) but my files were located in a different spot then most people that I have been reading. I don’t know if I installed it wrong on my windows 7 64 bit but I had to use the find function in regedit and toggle through them that way to change names of files.

I have hooked up to 1999-2006 Nissan Maximas, Altimas, and a couple newer Nissan Pathfinders all in the United States. Some vehicles do not auto detect VIN or IGN. ON. I have pulled codes, and datastream. I will be adding Keys and trying to add intellikeys on a newer nissan pathfinder. I’ll let everyone know the results.

This one took me a while to get my J2534 tool working right.

https://eobd21.wordpress.com/2016/11/10/get-nissan-consult-3-plus-to-work-with-j2534-tools/

Likes

Comments

Car key programmer
Xhorse company recently rolls out several high quality VVDI2 remote key type for VVDI remote makers/generators, including VVDI2 Mini Remote Programmer and VVDI Key Tool.

VVDI2 Mini Remote Programmer
VVDI2 Mini Remote Programmer 2

vvdi-key-tool

By using Xhorse Remote Key, you can accumulate member points which can be used to exchange VVDI 2 part special functions and accessories.



Xhorse VVDI2 Remote key can replaced KD900 remote key and they are cheap at half the price.



Xhorse VVDI2 remote key:


XHORSE VVDI2 Volkswagen 786 B5 Type Special Remote Key 3 Buttons individual package


XHORSE VVDI2 Volkswagen 786 B5 Type Special Remote Key 3 Buttons 10pcs/lot

VVDI2 Volkswagen 786 B5 Type Special Remote

XHORSE VVDI2 DS Type Wireless Universal Remote Key 3 Buttons individual package


XHORSE VVDI2 DS Type Wireless Universal Remote Key 3 Buttons 10pcs/lot
VVDI2 DS Type Wireless Universal Remote


XHORSE VVDI2 Hyundai Type Universal Remote Key 3 Buttons individual package

XHORSE VVDI2 Hyundai Type Universal Remote Key 3 Buttons 10pcs/lot
VVDI2 Hyundai Type Universal Remote


Audi A6L Q7 Intelligent Folding Remote Control key For VVDI2 Mini Remote Programmer individual package

Audi A6L Q7 Intelligent Folding Remote Control key 10pcs/lot

Audi A6L Q7 Intelligent Folding Remote

Likes

Comments

Odometer correction tool

Here is the pinout instruction to Dodge Ram 1500 HCS12 cluster if you need to change mileage on this model by digiprog 3 v4.94 odometer correction tool.


Note:

The digiprog3 pinout here is for Ram with HCS12 cluster, if your Dodge have differnt instrument cluster inside as picture below. You cannot follow the pinout.

Dodge Ram 1500 HCS12 Pinout to Digiprog 3 pic 1

Dodge Ram 1500 HCS12 Pinout to Digiprog 3 pic2

Note Tacho Meter
Dismantle Tacho meter
Identify processor
Solder the colored cables of Plus 51 to the suitable points
Connect Digiprog to separate electricity supply
Urgently necessarily
Connect digiprog with the plug
Follow the instructions of the digiprog 3
Choose program: PKW/LKW-Dodge-Ram–HCS12
Follow DigiProg prompt until mileage is successfully changed.

Digiprog 3 Pinout to Dodge Ram 1500 with ST92F120 MCU will be available in feature post.

Likes

Comments